PD12-03 Male Run Tee - 12mm Tube OD x BSP 3/8

PD12-03 Male Run Tee - 12mm Tube OD x BSP 3/8

Connect a matching female equipment port to a straight tube and a second equal-size tube at 90 degrees. Match both tube outside diameters and the actual thread. This PD run tee is a junction, not a shut-off valve.

Included in one sales unit

1 complete assembled PD male-run tee with two blue release collars and its brass threaded base. Tubing, the cylinder, other equipment, tools and storage boxes are not included.

Original supplier PD series photographs and real alternate views. Appearance and proportions vary with selected size; the photos are series references, not a separate photograph of every configuration. Selected tube OD and nominal thread are listed below.

Model & Reference Codes

Tube size is outside diameter at both push-in ports. Nominal BSP thread size is not a measured hole diameter; match the actual female port and thread form before installation.

Connect and inspect.

Isolate and fully depressurize. Match tube OD and the actual female equipment-port thread. Tighten the brass base at its hex using a sealing method suitable for the connection. Do not use the plastic body or blue collars as a wrench. Cut compatible tubing square, remove debris and insert both tubes fully. Pull gently to check retention. Restore air gradually and leak-check all three connections. Before removing a tube, depressurize, press its collar and withdraw the tube.

Pack quantities

Choose 1 / 5 / 20 identical complete fittings per pack. Quantity counts packs. Displayed pack prices include the shown savings.